EUROSWITCH销售中心热接触
Euroswitch提供单极双金属片和快速断路触点热接触，拥有各种不同配置。介入的温度可根据不同的用途而改变。介入的温度用接口电路的最低电负荷控制。主要用途：液压系统、散热器、换热器、润滑系统、汽车等领域的温度控制。应用传感器应根据具体的液体和环境情况使用。电负荷安装系统应当保障接地。应当通过一个SELV类型的系统保障供电。CE 标志这些产品的设计符合欧盟现行的指令和标准，并根据以下分类，贴有CE标志：A) 在50至1000V之间的交流电和75至1500V之间的直流电电压下运行的产品。符合以下指令：-2014/35/UE LVD -（低压指令）并符合EN 60730-1标准及其相关的第2部分。-2014/30/UE（EMC-电磁兼容性指令），符合EN 60730-1标准及其相关的第2部分。B) 在50V交流电和75 V 直流电电压下运行的产品。符合以下指令：-2014/30/UE（EMC-电磁兼容性指令），并符合EN60730-1标准及其相关的第2部分。在我们公司总部可以看到上述指令规定的合格声明。由于Euroswitch产品被归类为非安全组件，所以2006/42/EC《机械指令》不适用。我们的产品不受制于PED 2014/68/EU《压力设备指令》，因为它们是根据第4条，第3段规定设计的简单组件。ATEX 2014/34/UE指令也涵盖了在可能爆炸区域安装的版本。我们的产品符合RoHS规定：有害物质限制规定(RoHS II 2011/65 /UE)
Thermocontacts
Euroswitch offers single-pole thermocontacts with bimetal disc andquick opening contact, available in various configurations.The cut-in temperature and differential may vary, depending on thespecific application.Cut-in temperatures are controlled with the minimum electric load inthe contact circuit.Main applications: temperature control in hydraulic systems,radiators, heat exchangers, lubrification system, etc.
Operating conditions
Compatibility of the sensor for the intended use must be verifiedwith the specific fluid and under correct operating conditions.
Electrical loadGrounding must fasten by assembling system.Power must be menged thanks to a SELV system.
CE MarkingAll our products are designed in compliance with current EuropeanUnion Directives and Standards and bear the CE mark, according tothe following classification:a) Products operating at 50V to 1000V AC and 75V to 1500V DCComply with :- directive 2014/35/EU (LVD – Low Voltage Directive) and in compliance with EN 60730-1 and the relevant part 2.- directive 2014/30/EU (EMC – Electromagnetic Compatibility Directive) and meet the requirements of EN 60730-1 and the relevantpart 2.b) Products operating at 50V AC and 75V DC comply with:- directive 2014/30/EU (EMC – Electromagnetic Compatibility Directive) and meet the requirements of EN 60730-1 and the relevantpart 2.The Declaration of Conformity prescribed by the aforementioned directives are available at our headquarters.Machine Directive 2006/42/EC is not applicable as Euroswitch products are classified as non-safety-related products.Our products are not subject to directive 2014/68/UE (PED – PressureEquipment Directive) as they are simple component parts designedin accordance with art. 4, paragraph 3.The versions intended for use in potentially explosive areas are alsocovered by the ATEX Directive 2014/34/EU.Our products are RoHS compliant: Restriction of Hazardous Substances (RoHS II 2011/65/EU)